Trekker BRAVO
SpecFive · Tracker
Price: $119.99[1]
Specifications
| Specification | Value |
|---|---|
| Product status | Active [1] |
| LoRa chip | SX1262 [1] |
| Processor | ESP32-S3 [7] |
| Radio power | 126 mW (21 dBm) [7] |
| Frequency bands | 915 MHz [1] |
| GPS | Built in [1] |
| Display type | LCD [7] |
| Display size | 0.96 in [7] |
| Display details | 0.96-inch RGB TFT, 160 × 80 [7] |
| Input | Buttons [4] |
| Battery | 2500 mAh [1] |
| Dedicated solar input | No [1] |
| Antenna | External [1] Connector: LoRa and GNSS antenna connectors; exact connector type not specified [1] |
| IP rating | Unknown |
| Dimensions | 50 × 140 × 40 mm [1] |
| Weight | 165 g [1] |
Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Official [5] | Details
Confirm your exact device in the official flasher before choosing a build. Meshtastic web flasher |
| MeshCore | Supported [6] | Details
Confirm your exact device in the official flasher before choosing a build. MeshCore web flasher |
| UMSH | Unsupported | — |
Where to buy
| Vendor / configuration | Price | Based in | Ships from |
|---|---|---|---|
| SpecFive | |||
| Meshtastic / MeshCore · 915 MHz | $119.99 Observed 2026-10-21 | 🇺🇸 | Unknown |
Tindie Meshtastic · 915 MHz | $119.99 Observed 2026-10-21 | 🇺🇸 | Unknown |
Notes
The manufacturer’s BRAVO-specific MeshCore guide identifies current units as Heltec Wireless Tracker v1.1 or v1.2 and says not to use the guide for Wireless Tracker V2.[3]
Sources
- SpecFive Trekker BRAVO product page
- SpecFive Trekker BRAVO Tindie offer
- SpecFive Trekker BRAVO MeshCore conversion guide (Heltec Wireless Tracker v1.1/v1.2)
- Heltec Wireless Tracker V1.1 product page
- Meshtastic Heltec Wireless Tracker target
- MeshCore official flasher catalog
- Heltec Wireless Tracker V1.1 datasheet
Last updated 2026-10-21