Luckfox Ultra HAT V1

Community · Dev-board

Compare with other devices

Price: N/A

Specifications

SpecificationValue
Product statusDIY design [1]
LoRa chipSX1262 [3]
ProcessorExternal host [1]
Radio power1000 mW (30 dBm) [3]
Frequency bands850–930 MHz [3]
GPSUnknown
Display typeNone [2]
Display sizeNone
Display detailsNone [2]
InputNone [2]
BatteryNo built-in battery [2]
Dedicated solar inputNo [2]
AntennaExternal [2]
Connector: Unknown
IP ratingUnknown
DimensionsUnknown
WeightUnknown

Software support

The software runs on the connected computer.

SoftwareSupportDetails
MeshtasticCommunity [7]
Details
Host software
meshtasticd
Host build target(s)
native
MeshCoreUnsupported—
UMSHUnsupported [8]—

Build resources

Build it from the project documentation linked in Sources. Components and assembly are required.

Notes

V1 is an external-host radio HAT for the Luckfox Lyra Ultra W; it is not a complete node. The host software uses meshtasticd. The board and its Ebyte module need a band-appropriate antenna. The published V1 schematic identifies the module but does not identify a fitted RF connector. Designed by wehooper4.

[1] [2] [3] [4] [5] [6]

Sources

  1. wehooper4 Luckfox Ultra HAT README
  2. Luckfox Ultra HAT V1 schematic
  3. Ebyte E22-900M30S radio module specification
  4. wehooper4 Luckfox Ultra HAT checkout
  5. Meshtastic mPWRD-OS board support
  6. Luckfox Ultra HAT V1 meshtasticd configuration
  7. Meshtastic firmware meshtasticd config for wehooper4 Luckfox Ultra 1W hat (support: community)
  8. UMSH hardware support list
  9. Luckfox Ultra Hat V1 schematic published (wehooper4 maker repository)

Last updated 2026-10-20