Pico W + Pico-LoRa-SX1262
Community · Dev-board
Price: N/A
Specifications
| Specification | Value |
|---|---|
| Product status | DIY design [3] |
| LoRa chip | SX1262 [1] |
| Processor | RP2040 [2] |
| Radio power | 158 mW (22 dBm) [1] |
| Frequency bands | 410–525 MHz, 863–870 MHz, 902–930 MHz [1] |
| GPS | Not supported [3] |
| Display type | None [3] |
| Display size | None |
| Display details | None [3] |
| Input | None [2] |
| Battery | No built-in battery [3] |
| Dedicated solar input | No [3] |
| Antenna | External [3] Connector: IPEX 1 [3] |
| IP rating | Unknown |
| Dimensions | Unknown |
| Weight | Unknown |
Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Community [4] | Details
Confirm your exact device in the official flasher before choosing a build. Meshtastic web flasher |
| MeshCore | Supported [5] | Details
Confirm your exact device in the official flasher before choosing a build. MeshCore web flasher |
| UMSH | Unsupported [6] | — |
Build resources
Design files and purchasing options are linked below.
Notes
DIY stack of a separately purchased Pico W and Waveshare LoRa carrier.[2][1] The carrier supports battery charging, but this configuration includes no built-in cell.[1]
Sources
- Waveshare Pico-LoRa-SX1262 specification
- Raspberry Pi Pico W datasheet
- Waveshare Pico-LoRa-SX1262 schematic
- Meshtastic RP2040 Pico variant header
- MeshCore official flasher catalog
- UMSH hardware support list
- Waveshare Pico-LoRa-SX1262 store listing
Last updated 2026-10-20