SenseCAP Solar Node P1
Seeed Studio · Fixed node
Price: $77.99[1]
Specifications
| Specification | Value |
|---|---|
| Product status | Active [1] |
| LoRa chip | SX1262 [2] |
| Processor | nRF52840 [2] |
| Radio power | 158 mW (22 dBm) [2] |
| Frequency bands | 862–930 MHz [2] |
| GPS | Optional (add-on) [3] |
| Display type | None [4] |
| Display size | None |
| Display details | No screen [4] |
| Input | Buttons [2] |
| Battery | No built-in battery [3] |
| Dedicated solar input | Built in [2] |
| Antenna | External [4] Connector: RP-SMA [4] |
| IP rating | IPX6 [2] |
| Dimensions | 191.2 × 201.2 × 42.1 mm [2] |
| Weight | Unknown |

Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Official [4] | Details
Confirm your exact device in the official flasher before choosing a build. Meshtastic web flasher |
| MeshCore | Supported [5] | Details
Confirm your exact device in the official flasher before choosing a build. MeshCore web flasher |
| UMSH | Validated on hardware [7] | Details
Confirm your exact device in the official flasher before choosing a build. UMSH web flasher |
Where to buy
| Vendor / configuration | Price | Based in | Ships from |
|---|---|---|---|
| Seeed Studio | |||
| Meshtastic | $77.99 Observed 2026-10-19 | 🇨🇳 | 🇨🇳🇺🇸🇪🇺 |
Some of these links are affiliate links; we may earn a commission at no extra cost to you. It doesn't change what we list or the order. Details.
Notes
P1 ships without cells or GNSS; it has four 18650 battery positions and accepts an optional L76K GNSS module.
Sources
- Seeed SenseCAP Solar Node P1 product listing
- Seeed SenseCAP Solar Node introduction
- Seeed SenseCAP Solar Node setup guide
- Meshtastic SenseCAP Solar Node device page
- MeshCore official flasher device catalog
- MeshCore official firmware release assets
- UMSH hardware support list
- Seeed introduces SenseCAP Solar Node P1 and P1-Pro
Last updated 2026-10-20