RAK3212 WisDuo Breakout Board
RAKwireless · Dev-board
Price: $16.00[1]
Specifications
| Specification | Value |
|---|---|
| Product status | Active [1] |
| LoRa chip | SX1262 [2] |
| Processor | ESP32-S3 [2] |
| Radio power | 158 mW (22 dBm) [5] |
| Frequency bands | 864 MHz, 865 MHz, 868 MHz, 915 MHz, 920 MHz, 923 MHz [2] |
| GPS | Not supported [2] |
| Display type | None [2] |
| Display size | None |
| Display details | None [2] |
| Input | None [1] |
| Battery | No built-in battery [2] |
| Dedicated solar input | No [2] |
| Antenna | External [1] Connector: MHF4 [2] |
| IP rating | Unknown |
| Dimensions | 29 × 40 × 4.28 mm [2] |
| Weight | Unknown |

Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Unsupported | — |
| MeshCore | Supported [4] | Details
Confirm your exact device in the official flasher before choosing a build. MeshCore web flasher |
| UMSH | Unsupported | — |
Where to buy
Notes
RAKwireless documentation identifies this breakout board as RAK3212, built around a RAK3112 module; the store listing title calls the breakout “RAK3112”.[2][1] The board is sold with loose or pre-soldered headers and regional selections for EU868/IN865/RU864 or US915/AU915/KR920/AS923.[1] Both antennas and the USB cable are included.[1][2]
Sources
- RAKwireless RAK3112 Breakout Board listing
- RAKwireless RAK3212 WisDuo Breakout Board overview
- RAKwireless RAK3212 WisDuo Breakout Board quick start
- MeshCore official flasher configuration
- RAKwireless RAK3112 module datasheet — LoRa TX output up to 22 dBm
Last updated 2026-10-20