Bandit Nano
RadioMaster · Dev-board
Price: $49.99[1]
Specifications
| Specification | Value |
|---|---|
| Product status | Active [1] |
| LoRa chip | SX1276 [1] |
| Processor | ESP32 [1] |
| Radio power | 1000 mW (30 dBm) [1] |
| Frequency bands | 903.5–926.9 MHz [5] |
| GPS | Not supported [4] |
| Display type | OLED [1] |
| Display size | 0.96 in [1] |
| Display details | 0.96-inch OLED [1] |
| Input | Joystick [4] |
| Battery | No built-in battery [2] |
| Dedicated solar input | No [2] |
| Antenna | External [2] Connector: RP-SMA [2] |
| IP rating | Unknown |
| Dimensions | 68.5 × 41 × 27 mm [2] |
| Weight | 62.5 g [2] |
Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Community [3] | Details
Confirm your exact device in the official flasher before choosing a build. Meshtastic web flasher |
| MeshCore | Unsupported | — |
| UMSH | Unsupported [6] | — |
Where to buy
| Vendor / configuration | Price | Based in | Ships from |
|---|---|---|---|
| RadioMaster | |||
| ExpressLRS · 915 MHz | $49.99 Observed 2026-10-19 | Unknown | Unknown |
Notes
This Nano-bay module is factory-loaded with ExpressLRS and needs external power or a compatible transmitter bay. Meshtastic is available as a community-supported firmware target. The FCC test report measured 29.790–29.822 dBm peak conducted output at 6 V on the shared Bandit Nano/Micro design.
Sources
- RadioMaster Bandit Nano current listing
- RadioMaster Bandit Nano user manual
- Meshtastic Community Supported hardware table
- Meshtastic Bandit Nano firmware target
- FCC test report for shared Bandit Nano/Micro certification
- UMSH hardware support list
- Meshtastic first applicable Bandit Nano implementation
Last updated 2026-10-20