MeshTadpole+

Community · Dev-board

Compare with other devices

Price: N/A

Specifications

SpecificationValue
Product statusDIY design [1]
LoRa chipSX1262 [2]
ProcessorExternal host [2]
Radio power158 mW (22 dBm) [3]
Frequency bands902–928 MHz [4]
GPSNot supported [2]
Display typeNone [2]
Display sizeNone
Display detailsNo display [2]
InputNone [2]
BatteryNo built-in battery [2]
Dedicated solar inputNo [2]
AntennaExternal [2]
Connector: U.FL [2]
IP ratingUnknown
DimensionsUnknown
WeightUnknown

Software support

The software runs on the connected computer.

SoftwareSupportDetails
MeshtasticOfficial [7]
Details
Host software
meshtasticd
Host build target(s)
native
MeshCoreSupported [8]
Details
Host software
openHOP Repeater (Linux)
UMSHUnsupported [5]—

Build resources

Build it from the project documentation linked in Sources. Components and assembly are required.

Notes

USB-C LoRa radio for a separately supplied host computer. The 915 MHz SAW filter routes the Plus design’s RF path to U.FL.[1][2][4]

The 22 dBm figure is the fitted E22-900M22S module’s rating; the Plus adds a filter after that module.[2][3] Designed by wehooper4.[1]

Sources

  1. MeshTadpole Tadpoles hardware design
  2. MeshTadpole+ Rev 1.0 schematic
  3. EBYTE E22-900M22S SX1262 module specifications
  4. Qualcomm B39921B3728U410 915 MHz SAW filter datasheet
  5. UMSH hardware support list
  6. MeshTadpole+ exact schematic first published (wehooper4 maker repository)
  7. Meshtasticd CH341/SX1262 USB radio configuration (official support)
  8. openHOP Repeater host software — SX1262 CH341 backend and GPIO mapping

Last updated 2026-10-20