Meshimi v1.0

Community · Dev-board

Compare with other devices

Price: N/A

Specifications

SpecificationValue
Product statusDIY design [1]
LoRa chipSX1262 [2]
ProcessorESP32-C6 [2]
Radio power158 mW (22 dBm) [5]
Frequency bands868–960 MHz [5]
GPSNot supported [2]
Display typeNone [2]
Display sizeNone
Display detailsNo display [2]
InputNone [2]
BatteryNo built-in battery [2]
Dedicated solar inputNo [2]
AntennaInternal / External [3]
Connector: U.FL [2]
IP ratingUnknown
DimensionsUnknown
WeightUnknown

Firmware support

FirmwareSupportDetails
MeshtasticUnsupported—
MeshCoreSupported [4]
Details
Build target(s)
Meshimi_companion_radio_ble_, Meshimi_repeater_
Roles
  • Companion (Bluetooth): Meshimi_companion_radio_ble_
  • Repeater: Meshimi_repeater_
Minimum version
1.8.0

Confirm your exact device in the official flasher before choosing a build.

MeshCore web flasher
UMSHUnsupported [6]—

Build resources

Build it from the project documentation linked in Sources. Components and assembly are required.

Notes

The v1.0 PCB is a Flipper Zero expansion using an SMD XIAO ESP32-C6 and Wio-SX1262 module.[2][5] Separate enclosure CAD files describe internal- and external-antenna layouts.[3] Designed by Alex Begoon.[1]

Sources

  1. Meshimi hardware repository
  2. Meshimi v1.0 schematic
  3. Meshimi enclosure CAD files
  4. MeshCore Meshimi-specific XIAO C6 configuration
  5. Seeed Wio-SX1262 module guide
  6. UMSH hardware support list
  7. Meshimi V1.0 design files published

Last updated 2026-10-20