MeshAdventurer V1.3 E22-900M30S

Community · Dev-board

Compare with other devices

Price: N/A

Specifications

SpecificationValue
Product statusDIY design [1]
LoRa chipSX1262 [5]
ProcessorESP32 [3]
Radio power1000 mW (30 dBm) [5]
Frequency bands850–930 MHz [5]
GPSBuilt in [4]
Display typeOLED [4]
Display size0.96 in [4]
Display details0.96-inch SSD1306 OLED [4]
InputButtons, Rotary encoder [3]
BatteryNo built-in battery [3]
Dedicated solar inputNo [3]
AntennaExternal [3]
Connector: SMA [3]
IP ratingUnknown
DimensionsUnknown
WeightUnknown

Firmware support

FirmwareSupportDetails
MeshtasticUnsupported—
MeshCoreSupported [6]
Details
Build target(s)
Meshadventurer_sx1262_companion_radio_ble, Meshadventurer_sx1262_companion_radio_usb, Meshadventurer_sx1262_repeater, Meshadventurer_sx1262_room_server
Roles
  • Companion (Bluetooth): Meshadventurer_sx1262_companion_radio_ble
  • Companion (USB): Meshadventurer_sx1262_companion_radio_usb
  • Repeater: Meshadventurer_sx1262_repeater
  • Room server: Meshadventurer_sx1262_room_server
Minimum version
1.7.2

Confirm your exact device in the official flasher before choosing a build.

MeshCore web flasher
UMSHUnsupported [8]—

Build resources

Build it from the project documentation linked in Sources. Components and assembly are required.

Notes

This is a DIY board design requiring a 38-pin ESP32 DevKit, E22 module, GPS breakout, OLED, antenna and assembly. V1.3 BOMs document E22-900M30S; the 433 MHz E22-400M30S option is documented by the project README and firmware radio map, but has no separate published BOM. Designed by Chris Myers (FrequencyLabs).

[4] [1] [2]

Sources

  1. MeshAdventurer hardware repository
  2. MeshAdventurer build README
  3. MeshAdventurer V1.3 schematic
  4. MeshAdventurer V1.3 bill of materials
  5. EBYTE E22 module specification
  6. MeshCore MeshAdventurer radio target
  7. Meshtastic Hydra radio configuration
  8. UMSH hardware support list
  9. MeshAdventurer V1.3 schematic published

Last updated 2026-10-20