IKOKA Handheld OLED
Community · Dev-board
Price: N/A
Specifications
| Specification | Value |
|---|---|
| Product status | DIY design [1] |
| LoRa chip | SX1262 [4] |
| Processor | nRF52840 [3] |
| Radio power | 1000 mW (30 dBm) [4] |
| Frequency bands | 850–930 MHz [4] |
| GPS | Not supported [1] |
| Display type | OLED [3] |
| Display size | 0.96 in [3] |
| Display details | 0.96-inch SSD1306 OLED [3] |
| Input | Buttons [2] |
| Battery | No built-in battery [3] |
| Dedicated solar input | No [2] |
| Antenna | External [3] Connector: SMA [3] |
| IP rating | Unknown |
| Dimensions | Unknown |
| Weight | Unknown |
Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Unsupported | — |
| MeshCore | Supported [5] | Details
Confirm your exact device in the official flasher before choosing a build. MeshCore web flasher |
| UMSH | Unsupported [6] | — |
Build resources
Build it from the project documentation linked in Sources. Components and assembly are required.
Notes
Open hardware DIY build requiring a Seeed XIAO nRF52840, Ebyte E22-900M30S, antenna, optional LiPo cell, and assembly. The OLED component is a distinct fitted-board configuration. Designed by Andrew Yong (nDoo).
Sources
- IKOKA Handheld design repository
- IKOKA Handheld build README
- IKOKA Handheld schematic
- Ebyte E22-900M30S datasheet
- MeshCore companion firmware v1.18.0 release assets
- UMSH hardware support list
- IKOKA Handheld redesign and part options first published
Last updated 2026-10-20