IKOKA Stick E22-900M22S

Community · Dev-board

Compare with other devices

Price: N/A

Specifications

SpecificationValue
Product statusDIY design [1]
LoRa chipSX1262 [3]
ProcessornRF52840 [4]
Radio power158 mW (22 dBm) [3]
Frequency bands850–930 MHz [3]
GPSNot supported [1]
Display typeNone [2]
Display sizeNone
Display details0.96-inch OLED (optional) [2]
InputButtons [2]
BatteryNo built-in battery [1]
Dedicated solar inputNo [1]
AntennaExternal [3]
Connector: IPEX/U.FL [3]
IP ratingUnknown
DimensionsUnknown
WeightUnknown

Firmware support

FirmwareSupportDetails
MeshtasticCommunity [5]
Details
Build target(s)
Unknown
Minimum version
Unknown

Confirm your exact device in the official flasher before choosing a build.

Meshtastic web flasher
MeshCoreSupported [4]
Details
Build target(s)
ikoka_stick_nrf_22dbm_companion_radio_ble, ikoka_stick_nrf_22dbm_companion_radio_usb, ikoka_stick_nrf_22dbm_repeater, ikoka_stick_nrf_22dbm_room_server
Roles
  • Companion (Bluetooth): ikoka_stick_nrf_22dbm_companion_radio_ble
  • Companion (USB): ikoka_stick_nrf_22dbm_companion_radio_usb
  • Repeater: ikoka_stick_nrf_22dbm_repeater
  • Room server: ikoka_stick_nrf_22dbm_room_server
Minimum version
1.8.0

Confirm your exact device in the official flasher before choosing a build.

MeshCore web flasher
UMSHUnsupported [6]—

Build resources

Build it from the project documentation linked in Sources. Components and assembly are required.

Notes

Builder supplies the XIAO nRF52840, carrier PCB, E22-900M22S, antenna and power parts; the 0.96-inch SSD1306 OLED and battery are optional.[2][1] Designed by Andrew Yong (nDoo).[1]

Sources

  1. IKOKA Stick open hardware design
  2. IKOKA Stick build guide
  3. EBYTE E22-900M22S module
  4. MeshCore IKOKA Stick exact radio configuration
  5. Meshtastic seeed_xiao_nrf52840_e22 DIY target
  6. UMSH hardware support list

Last updated 2026-10-20