WiFi LoRa 32 V4 22 dBm
Heltec Automation · Dev-board
Price: $19.90[5]
Specifications
| Specification | Value |
|---|---|
| Product status | Active [1] |
| LoRa chip | SX1262 [2] |
| Processor | ESP32-S3 [2] |
| Radio power | 158 mW (22 dBm) [2] |
| Frequency bands | 470–510 MHz, 863–870 MHz, 902–928 MHz [1] |
| GPS | Not supported [2] |
| Display type | OLED [2] |
| Display size | 0.96 in [2] |
| Display details | 0.96-inch OLED [2] |
| Input | Buttons [8] |
| Battery | No built-in battery [1] |
| Dedicated solar input | Built in [2] |
| Antenna | External [2] Connector: IPEX 1.0 LoRa antenna interface [2] |
| IP rating | Unknown |
| Dimensions | 51.7 × 25.4 × 10.7 mm [2] |
| Weight | Unknown |

Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Official [3] | Details
Confirm your exact device in the official flasher before choosing a build. Meshtastic web flasher |
| MeshCore | Supported [4] | Details
Confirm your exact device in the official flasher before choosing a build. MeshCore web flasher |
| UMSH | Unsupported [6] | — |
Where to buy
| Vendor / configuration | Price | Based in | Ships from |
|---|---|---|---|
| Heltec Automation | |||
| 863–870 / 902–928 MHz | $19.90 Observed 2026-10-19 | Unknown | 🇨🇳🇪🇺🇺🇸 |
Notes
This V4 configuration uses ESP32-S3R2 with 2 MB PSRAM; the separate V4-R8 has 8 MB PSRAM.[2] The current 863–870 MHz ESP32-S3R2 OLED maker SKU is listed at $19.90.[5]
Sources
- Heltec WiFi LoRa 32 V4 product page
- Heltec WiFi LoRa 32 V4.2 datasheet
- Meshtastic official hardware device directory
- MeshCore official flasher device catalog
- Heltec WiFi LoRa 32 V4 863–870 MHz, ESP32-S3R2 OLED SKU
- UMSH hardware support list
- Heltec WiFi LoRa 32 V4 hardware update log
- Heltec V4 Meshtastic firmware input pin mapping
Last updated 2026-10-20