WiFi LoRa 32 V2.0 HF
Heltec Automation · Dev-board
Price: Unknown
Specifications
| Specification | Value |
|---|---|
| Product status | Discontinued (EOL) [2] |
| LoRa chip | SX1276 [5] |
| Processor | ESP32 [5] |
| Radio power | 79 mW (19 dBm) [3] |
| Frequency bands | 868–915 MHz [5] |
| GPS | Not supported [5] |
| Display type | OLED [3] |
| Display size | 0.96 in [3] |
| Display details | 0.96-inch OLED [3] |
| Input | Buttons [5] |
| Battery | Unknown |
| Dedicated solar input | No [5] |
| Antenna | External [5] Connector: IPEX/U.FL LoRa antenna connector [5] |
| IP rating | Unknown |
| Dimensions | 51 × 25.5 × 10.6 mm [3] |
| Weight | Unknown |
Firmware support
| Firmware | Support | Details |
|---|---|---|
| Meshtastic | Community [4] | Details
Confirm your exact device in the official flasher before choosing a build. Meshtastic web flasher |
| MeshCore | Unsupported | — |
| UMSH | Unsupported [6] | — |
Where to buy
No buy links yet.
Notes
Historical WiFi LoRa 32 2.0 HF bare-board configuration using SX1276.[5] The V2 family is being phased out in favor of V3 for new designs.[1]
UMSH firmware builds from source; hardware validation and downloadable releases are pending.[6]
Sources
- Heltec hardware update logs
- Heltec WiFi LoRa 32 V2 phase-out product page
- Heltec WiFi LoRa 32 V2 manual
- Meshtastic community-supported device directory
- Heltec WiFi LoRa 32 V2.0 868–915 MHz schematic
- UMSH hardware support list
- Heltec WiFi LoRa 32 V2 hardware update log
Last updated 2026-10-20