Pico 2 + W5500 + E22-900M30S

Community · Dev-board

Compare with other devices

Price: N/A

Specifications

SpecificationValue
Product statusDIY design [1]
LoRa chipSX1262 [3]
ProcessorRP2350 [2]
Radio power1000 mW (30 dBm) [3]
Frequency bands850–930 MHz [3]
GPSOptional (add-on) [1]
Display typeNone [1]
Display sizeNone
Display detailsNone [1]
InputNone [5]
BatteryNo built-in battery [1]
Dedicated solar inputNo [1]
AntennaExternal [1]
Connector: Unknown
IP ratingUnknown
DimensionsUnknown
WeightUnknown

Firmware support

FirmwareSupportDetails
MeshtasticCommunity [5]
Details
Build target(s)
pico2_w5500_e22
Minimum version
Unknown

Confirm your exact device in the official flasher before choosing a build.

Meshtastic web flasher
MeshCoreUnsupported—
UMSHUnsupported [6]—

Build resources

Build it from the project documentation linked in Sources. Components and assembly are required.

Notes

Community reference build: Raspberry Pi Pico 2, WIZnet W5500 Ethernet breakout and Ebyte E22-900M30S. The radio module needs a DIO2-to-TXEN bridge; select a locally permitted band and antenna. This USB-powered configuration has no integrated GNSS receiver. Designed by Carlos Valdes.

[1] [2] [3] [4]

Sources

  1. Meshtastic Pico 2 W5500 E22 build
  2. Raspberry Pi Pico 2 product page
  3. Ebyte E22-900M30S module specifications
  4. Meshtastic PR #10135
  5. Meshtastic pico2_w5500_e22 target (no support level)
  6. UMSH hardware support list
  7. Meshtastic Raspberry Pi Pico 2 W5500 E22-900M30S variant added

Last updated 2026-10-20